Liqui Moly ATF Additive for Optimal Care and Performance

Ans.LiquiMoly ATF (Automatic Transmission Fluid) Additive is designed to provide optimal care for rubber and plastic seals in steering gears and automatic transmission of your vehicle.It helps prevent and remedy leaks caused by hardened or brittle seals, cleans holes and ducts, reduces noise, and improves shifting operations.This additive can extend the service life of steering gears and automatic transmissions.

Ans.The Liqui Moly ATF Additive works by conditioning internal components of vehicle transmission to reduce leaks, smooth out gear shifts, and improve overall transmission & steering performance.

Ans.To use LiquiMoly ATF Additive, mix it into the gear oil using the dipstick.One 250 ml tube is sufficient to treat up to 8 -10 litres of oil.Refer to the product instructions for precise dosages.Ensure the additive is thoroughly mixed for optimal performance.

Ans.LiquiMoly ATF Additive is suitable for all steering gears and automatic transmissions that are filled with ATF II and ATF III oils.Check your vehicle’s service manual to ensure compatibility with transmission fluid additives.

Ans.Liqui Moly ATF Additive is formulated to improve the performance of power steering systems.It optimises steering operation and reduces noise in the system.

Ans.You can add the additive yourself, however, it is recommended to have a professional mechanic do it as he will add the correct amount and check that transmission is properly cleaned before adding the additive, thereby maximizing its effectiveness.

Ans.If you do not notice any improvement after adding LiquiMoly ATF additive, it may be due to severe wear or damage to the transmission system.The additive is designed to only rejuvenate the transmission oil and improve its efficiency.

Ans.Use LiquiMoly ATF Additive during your vehicle’s regular maintenance schedule or when you notice issues such as leaks, noise, or poor gear shifting performance.For optimal performance, it is recommended to use Liqui Moly ATF Additive with each transmission fluid change or every 30,000 - 60,000 kms, depending on your vehicle and driving conditions.

Ans.The main benefits are prevention & fixing of leaks, reduction in noise, improved gear shifting, extended service life of steering gears and automatic transmission, prevention of rapid oil aging and oxidation, and high resistance to wear and tear with use.

Ans.LiquiMoly ATF additive is formulated to be safe for use in vehicles with ATF II and ATF III oils.It rejuvenates the condition of the transmission oil, revitalizes oil performance and prevents expensive repairs by maintaining & protecting the seals and internal components of your transmission as well as steering gear.

Ans.LiquiMoly ATF Additive can smooth out gear shifting operations and address oil flow and leakage issues caused by hardened or brittle seals.In most cases, you will see an improvement in gear shifting performance.

Ans.The Liqui Moly ATF Additive can help reduce minor leaks by conditioning and revitalizing the seals.However, if you have a significant leak, it is best to have your vehicle serviced and repaired.

Ans.Results vary depending on the condition of your vehicle’s transmission and steering gear.Driver’s will notice improvements within approximately 20 km of driving after adding the additive or it may take a couple of drives to see results.Allow some time for the additive to work through the system for maximum performance.

Ans.It is generally not recommended to mix multiple additives as they can interact unpredictably in your vehicle.If you are considering using more than one additive, consult with a service centre for compatibility and safety for your vehicle's transmission.

Ans.In case of a spill, clean the area immediately.LiquiMoly ATF Additive is non-toxic but it should not be released into the environment.Avoid contact with skin & eyes, and use appropriate protective measures such as gloves and safety glasses during handling.

Ans.Using aftermarket additives like Liqui Moly ATF Additive does not affect your vehicle's warranty.However, it's always best to check the specific terms of your warranty or you can consult with your vehicle dealership.

Ans.Liqui Moly ATF Additive is effective in older vehicles with high-mileage as well as modern cars, SUVs and heavy vehicles, helping to smooth out gear shifts & reduce transmission noise.It is particularly useful for vehicles that have not had a recent transmission fluid flush or oil change.

Ans.The Liqui Moly ATF Additive is best for minor transmission issues such as hard gear shifting, slipping, or general wear & tear in automatic transmissions.If your vehicle has major transmission problems, poor steering performance due to severe leaks or complete failure to shift or turn, it is advisable to consult with your service centre.